Pellet Stove Piping 4"
4PVP-WT  WALL THIMBLE
Price91.17
Sale77.17
You Save14.00 (15%)
3PVP-WT3: Use for through-the-wall installations. Fits between standard
wall studs. Comes with an insulation ring to reduce air infiltration
where the pipe slips through the thimble.
4PVP-ADFF LINER ADAPTER
Price25.54
Sale21.54
You Save4.00 (16%)
Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish. 3PVP-ADFF:
Use to connect PelletVent Pro to BioFlex when relining a
masonry chimney. Only approved for use with BioFlex.
4PVP-ADFM
Price44.03
Sale38.03
You Save6.00 (14%)
Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish. 3PVP-ADFM:
Use to connect BioFlex to PelletVent Pro when relining a masonry
chimney. Only approved for use with BioFlex.
4PVP-FTC RIDGET PELLET STOVE PIPE TO FLEX LINER
Price78.56
Sale66.56
You Save12.00 (15%)
Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish. PVP-FTC: Use
to connect PelletVent Pro rigid pipe to a masonry chimney
with stainless steel flexible relining. Female end swivels to allow
ease of connection.
4PVP-TAD TEE TO APPLIANCE WITHOUT ADAPTER
Price139.86
Sale117.86
You Save22.00 (16%)
Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish. 3PVP-TAD: Use for a 90° offset. Attaches directly to appliance as an adapter.
Removeable twist-lock Clean-Out Tee Cap.
3PVP-TADX4 TEE WITH INCREASE TO 4"
Price144.08
Sale120.08
You Save24.00 (17%)
Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish. 3PVP-TADX4: Use for a 90° offset. Attaches directly to appliance as an
adapter. Converts a 3” appliance to a 4” PelletVent Pro system.
Removeable twist-lock Clean-Out Tee Cap.
4PVP-WSA ADJUSTABLE SUPPORT 1”- 3” clearance
Price36.31
Sale30.31
You Save6.00 (17%)
Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish.3PVP-WSA: Use to support vent pipe or tee sections. Adjusts to provide
1”- 3” clearance.
4PVP-CS   CEILING SUPPORT
Price132.94
Sale110.94
You Save22.00 (17%)
Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish.3PVP-CS: Use to support pipe. May be used on flat ceilings. Painted black.
Trim and clamp included.
4PVP-F6  ROOF FLASHING
Price27.99
Sale23.99
You Save4.00 (14%)
Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish. 3PVP-F6: Use
to weather proof the penetration of vent pipe through the
roof. Storm Collar required. Select roof flashing based on pitch of
roof. For pitches of 0/12 - 6/12. For steep roof pitches, refer to the
Type B Gas Vent section.
4PVP-X6 ADAPTER 4" TO 6"
Price114.28
Sale96.28
You Save18.00 (16%)
3PVP-X6: Use to transition between PelletVent Pro to existing chimney
such as DuraTech, DuraPlus or DuraPlus HTC. Requires a DVL/
DuraBlack Chimney Adapter to fasten into support box or wall
thimble, for 6”, use adapter 8674, for 8”, use adapter 8874.
Your Cart
Your shopping cart is empty!
Languages
Arabic Brazilian Czech German Greek English Spanish Finnish French Croatian Hungarian Italian Lithuanian Latvian Dutch Norweigian Polish Portuguese Russian Slovak Swedish Turkish Ukrainian Vietnamese
-->
ViArt Free PHP Shopping Cart