Wood Pellet Stoves in BC

RC1902: Remote Control to operate manual mode, temperature, on/off and hold/unhold- for model S1902 and HP-22.

CB1902: Software based control board mounted at rear top of pellet stove - for model S1902 and HP-22.

RIB1902:
Ribbon cable that connects the program board with the power board - for model S1902 and HP-22.

EXM1902: Exhaust blower has a vertical position for minimum wear on bearings and is located at rear right of pellet stove, quite operation, speed is controlled by computer for maximum efficiency - for model S1902 and HP-22.

AUM1902: A new and unique Auger motor design to give more reliability and strength with  a very quite operation, located at rear of pellet stove just bellow hopper - for model S1902 and HP-22.

COF1902: A squall cage design convection motor with a very quite operation is located at the center / rear of the fire box, can be removed very quickly, the speed is controlled by computer for maximum efficiency - for model S1902 and HP-22.

MC1902: Motor capacitor which is clipped onto frame close to auger motor. Gives more stability and torque to auger motor - for model S1902 and HP-22.

IG1902:    

TC1902: Thermostat located on the exhaust motor housing to let the computer know that a fire has been established. Closes at 120F - for model S1902 and HP-22.

TH1902: High limit thermostat located at the rear left side of body, lets the computer know that a too high of a temperature has been reached - for model S1902 and HP-22.