Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish. PVP-FTC: Use
to connect PelletVent Pro rigid pipe to a masonry chimney
with stainless steel flexible relining. Female end swivels to allow
ease of connection.

Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish. 3PVP-TAD: Use for a 90° offset. Attaches directly to appliance as an adapter.
Removeable twist-lock Clean-Out Tee Cap.

Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish. 3PVP-TADX4: Use for a 90° offset. Attaches directly to appliance as an
adapter. Converts a 3” appliance to a 4” PelletVent Pro system.
Removeable twist-lock Clean-Out Tee Cap.

Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish. 3PVP-WS: Use
 to support vent pipe or tee sections. Provides 1” clearance.

Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish.3PVP-WSA: Use to support vent pipe or tee sections. Adjusts to provide
1”- 3” clearance.

Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish.3PVP-CS: Use to support pipe. May be used on flat ceilings. Painted black.
Trim and clamp included.

Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish.3PVP-SC:
Use to maintain a weather tight resistant seal between the pipe
and the flashing.

Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish. 3PVP-F6: Use
to weather proof the penetration of vent pipe through the
roof. Storm Collar required. Select roof flashing based on pitch of
roof. For pitches of 0/12 - 6/12. For steep roof pitches, refer to the
Type B Gas Vent section.

3PVP-X6: Use to transition between PelletVent Pro to existing chimney
such as DuraTech, DuraPlus or DuraPlus HTC. Requires a DVL/
DuraBlack Chimney Adapter to fasten into support box or wall
thimble, for 6”, use adapter 8674, for 8”, use adapter 8874.

3PVP-X8: Use to transition between PelletVent Pro to existing chimney
such as DuraTech, DuraPlus or DuraPlus HTC. Requires a DVL/
DuraBlack Chimney Adapter to fasten into support box or wall
thimble, for 6”, use adapter 8674, for 8”, use adapter 8874.